24 infotainment system – GMC 2012 Savana User Manual

Page 194

Advertising
background image

Black plate (24,1)

GMC Savana Owner Manual - 2012 - 2nd - 11/15/11

7-24

Infotainment System

Pairing Information

.

A Bluetooth phone with MP3
capability cannot be paired to
the vehicle as a phone and an
MP3 player at the same time.

.

Up to five cell phones can be
paired to the Bluetooth system.

.

The pairing process is disabled
when the vehicle is moving.

.

Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.

.

Only one paired cell phone can
be connected to the Bluetooth
system at a time.

.

If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were first paired
to the system. To connect to a
different paired phone, see
“Connecting to a Different
Phone” later in this section.

Pairing a Phone

1. Press and hold

b

/

g

for

two seconds.

2. Say “Bluetooth.” This command

can be skipped.

3. Say “Pair.” The system responds

with instructions and a four‐digit
Personal Identification Number
(PIN). The PIN is used in Step 5.

4. Start the pairing process on the

cell phone that you want to pair.
For help with this process, see
the cell phone manufacturer's
user guide.

5. Locate the device named “Your

Vehicle” in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3. After the
PIN is successfully entered, the
system prompts you to provide a
name for the paired cell phone.

This name will be used to
indicate which phones are
paired and connected to the
vehicle. The system responds
with “<phone name> has been
successfully paired” after the
pairing process is complete.

6. Repeat Steps 1 through 5 to pair

additional phones.

Listing All Paired and Connected
Phones

The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with “is connected”
after that phone name.

1. Press and hold

b

/

g

for

two seconds.

2. Say “Bluetooth.”

3. Say “List.”

Advertising