Driving and operating 9-57 – GMC 2012 Savana User Manual

Page 265

Advertising
background image

Black plate (57,1)

GMC Savana Owner Manual - 2012 - 2nd - 11/11/11

Driving and Operating

9-57

The four-wire harness (without
connector) contains the following
circuits:

.

Black: Ground

.

Red/White: Battery Feed

.

Dark Blue: Trailer Brake Signal

.

Light Blue: CHMSL/Stoplamp
Supply Voltage

* If the vehicle is a cutaway with
trailer provisions, a 15 amp fuse will
be shared for both left/stop trailer
turn and right/stop trailer turn
signals. However, the cutaway
lighting connector will have a
10 amp fuse for each signal.

** If the vehicle is a cutaway with
trailer provisions, a 15 amp fuse will
be shared for trailer park lamps and
cutaway rear lighting connector park
lamps. Also, a 10 amp fuse will be
shared for trailer back-up lamps and
cutaway rear lighting connector
back-up lamps.

Tow/Haul Mode

This button is on the instrument
panel, to the right of the steering
wheel.

Pressing this button turns on and off
the Tow/Haul Mode.

This indicator light on the instrument
panel cluster comes on when the
Tow/Haul Mode is on.

Tow/Haul is a feature that assists
when pulling a heavy trailer or a
large or heavy load. See Tow/Haul
Mode on page 9‑32
for more
information.

Tow/Haul is designed to be most
effective when the vehicle and
trailer combined weight is at least
75 percent of the vehicle Gross
Combined Weight Rating (GCWR).
See “Weight of the Trailer” in Trailer
Towing on page 9‑50
. Tow/Haul is
most useful under the following
driving conditions:

.

When pulling a heavy trailer or a
large or heavy load through
rolling terrain.

.

When pulling a heavy trailer or a
large or heavy load in stop and
go traffic.

.

When pulling a heavy trailer or a
large or heavy load in busy
parking lots where improved low
speed control of the vehicle is
desired.

Advertising