Instruments and controls 5-53 – GMC 2011 Acadia User Manual

Page 185

Advertising
background image

Black plate (53,1)

GMC Acadia/Acadia Denali Owner Manual - 2011

Instruments and Controls

5-53

EASY EXIT SEAT

If your vehicle has this feature, it
allows you to select your preference
for the automatic easy exit seat
feature. See Delayed Locking on
page 2‑8
for more information.

Press the customization button until
EASY EXIT SEAT appears on the
DIC display. Press the set/reset
button once to access the settings
for this feature. Then press the
customization button to scroll
through the following settings:

OFF (default): No automatic seat
exit recall will occur.

ON: The driver's seat will move
back when the key is removed from
the ignition.

The automatic easy exit seat
movement will only occur one time
after the key is removed from the

ignition. If the automatic movement
has already occurred, and you put
the key back in the ignition and
remove it again, the seat and
steering column will stay in the
original exit position, unless a
memory recall took place prior
to removing the key again.

NO CHANGE: No change will be
made to this feature. The current
setting will remain.

To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.

MEMORY SEAT RECALL

If your vehicle has this feature, it
allows you to select your preference
for the remote memory seat recall
feature. See Delayed Locking on
page 2‑8
for more information.

Press the customization button
until MEMORY SEAT RECALL
appears on the DIC display. Press
the set/reset button once to access
the settings for this feature. Then
press the customization button to
scroll through the following settings:

OFF (default): No remote memory
seat recall will occur.

ON: The driver's seat and outside
mirrors will automatically move to
the stored driving position when
the unlock button on the Remote
Keyless Entry (RKE) transmitter is
pressed.

NO CHANGE: No change will be
made to this feature. The current
setting will remain.

To select a setting, press the
set/reset button while the desired
setting is displayed on the DIC.

Advertising