GMC 2011 Acadia User Manual

Page 36

Advertising
background image

Black plate (4,1)

GMC Acadia/Acadia Denali Owner Manual - 2011

2-4

Keys, Doors and Windows

K

(Unlock): Press once to

unlock only the driver door. If

K

is

pressed again within five seconds,
all remaining doors unlock. The
interior lamps come on and stay on
for 20 seconds or until the ignition
is turned on.

If enabled through the DIC, the
parking lamps flash twice to indicate
unlocking has occurred. See Vehicle
Personalization (With DIC Buttons)
on page 5‑47
.

Pressing

K

on the RKE transmitter

disarms the content theft‐deterrent
system. See Anti-Theft Alarm
System on page 2‑13
.

&

(Power Liftgate): Press and

hold until the liftgate begins to
move to open or close the liftgate.
The taillamps flash and a chime
sounds to indicate when the liftgate
is opening or closing.

L

(Vehicle Locator/Panic

Alarm): Press and release to
locate the vehicle. The parking
lamps flash and the horn sounds
three times.

Press and hold

L

for more than

two seconds to activate the panic
alarm. The parking lamps flash
and the horn sounds repeatedly
for 30 seconds. The alarm turns
off when the ignition is moved to
ON/RUN or

L

is pressed again.

The ignition must be in LOCK/OFF
for the panic alarm to work.

The vehicle comes with two
transmitters. Each transmitter will
have a number on it, "1" or "2".
These numbers correspond
to the driver of the vehicle.
For example, the memory
seat position for driver 1 will be

recalled when using the transmitter
labeled "1", if enabled through
the vehicle personalization.
See “Memory Seat and Mirrors”
under Power Seat Adjustment on
page 3‑4
and “Memory Seat Recall”
under Vehicle Personalization (With
DIC Buttons) on page 5‑47
for more
information.

Programming Transmitters to
the Vehicle

Only RKE transmitters
programmed to this vehicle
will work. If a transmitter is lost
or stolen, a replacement can be
purchased and programmed through
your dealer. When the replacement
transmitter is programmed to this
vehicle, all remaining transmitters
must also be reprogrammed.

Advertising