Delayed exit lighting, Parade dimming, Battery load management – GMC 2011 Acadia User Manual

Page 199: Lighting 6-7

Advertising
background image

Black plate (7,1)

GMC Acadia/Acadia Denali Owner Manual - 2011

Lighting

6-7

Delayed Exit Lighting

Delayed exit lighting illuminates the
interior for a period of time after the
key is removed from the ignition.

The ignition must be off for delayed
exit lighting to work. When the key
is removed, interior illumination
activates and remains on until
one of the following occurs:

.

The ignition is in ON/RUN.

.

The power door locks are
activated.

.

An illumination period of
20 seconds has elapsed.

If during the illumination period
a door is opened, the timed
illumination period will be canceled
and the interior lamps will remain
on because a door is open.

Parade Dimming

This feature automatically prohibits
the dimming of the instrument
panel displays in daylight while
the headlamps are on so that the
displays are still able to be seen.

Battery Load
Management

The vehicle has Electric Power
Management (EPM) that estimates
the battery's temperature and state
of charge. It then adjusts the voltage
for best performance and extended
life of the battery.

When the battery's state of charge
is low, the voltage is raised slightly
to quickly bring the charge back up.
When the state of charge is high,
the voltage is lowered slightly to
prevent overcharging. If the vehicle
has a voltmeter gauge or a voltage
display on the Driver Information
Center (DIC), you may see the

voltage move up or down. This is
normal. If there is a problem, an
alert will be displayed.

The battery can be discharged at
idle if the electrical loads are very
high. This is true for all vehicles.
This is because the generator
(alternator) may not be spinning
fast enough at idle to produce
all the power needed for very
high electrical loads.

A high electrical load occurs when
several of the following are on,
such as: headlamps, high beams,
fog lamps, rear window defogger,
climate control fan at high speed,
heated seats, engine cooling fans,
trailer loads, and loads plugged into
accessory power outlets.

EPM works to prevent excessive
discharge of the battery. It does this
by balancing the generator's output
and the vehicle's electrical needs.

Advertising