Electrical system overload, Fuses and circuit breakers, Electrical system – GMC 2011 Acadia User Manual

Page 360: Overload -32, Fuses and circuit, Breakers -32, 32 vehicle care

Advertising
background image

Black plate (32,1)

GMC Acadia/Acadia Denali Owner Manual - 2011

10-32

Vehicle Care

Electrical System
Overload

The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.

When the current electrical load
is too heavy, the circuit breaker
opens and closes, protecting the
circuit until the current load returns
to normal or the problem is fixed.
This greatly reduces the chance of
circuit overload and fire caused by
electrical problems.

Fuses and circuit breakers protect
the following in the vehicle:

.

Headlamp Wiring

.

Windshield Wiper Motor

.

Power Windows and Other
Power Accessories

Replace a bad fuse with a new one
of the identical size and rating.

If there is a problem on the road
and a fuse needs to be replaced,
the same amperage fuse can be

borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.

Headlamp Wiring

An electrical overload may cause
the lamps to go on and off, or in
some cases to remain off. Have
the headlamp wiring checked right
away if the lamps go on and off or
remain off.

Windshield Wipers

If the wiper motor overheats due to
heavy snow or ice, the windshield
wipers will stop until the motor cools
and will then restart.

Although the circuit is protected
from electrical overload, overload
due to heavy snow or ice may
cause wiper linkage damage.
Always clear ice and heavy snow
from the windshield before using
the windshield wipers.

If the overload is caused by an
electrical problem and not snow
or ice, be sure to get it fixed.

Fuses and Circuit
Breakers

The wiring circuits in your vehicle
are protected from short circuits
by a combination of fuses, circuit
breakers and fusible thermal links.
This greatly reduces the chance of
fires caused by electrical problems.

Look at the silver-colored band
inside the fuse. If the band is broken
or melted, replace the fuse. Be sure
you replace a bad fuse with a new
one of the identical size and rating.

Fuses of the same amperage
can be temporarily borrowed from
another fuse location, if a fuse goes
out. Replace the fuse as soon as
you can.

Advertising