Great Planes Giles G-202 46 Kit - GPMA0238 - Manual (Page 4)

❏
(1) Y-harness (HCAM2500 for Futaba ® ) or (2) 12"
servo extensions (HCAM1200 for Futaba) and
computerized radio
Optional radio equipment:
❏
(1) 18" servo extension for rear rudder mounting location
❏
6th servo, computerized radio and either a Y-harness
or (2) 12" servo extensions for dual elevator servos
❏
Engine – See Engine Selection page 3
❏
Exhaust – See Exhaust System page 3
❏
Spare glow plugs [O.S. #8 for most 2-stroke engines,
(OSMG2691), O.S. Type-F for most 4-stroke engines,
(OSMG2629)]
❏
Propeller (Top Flite Power Point ® ); Refer to your engine’s
instructions for proper size. Note: We recommend
staying with a six pitch and the appropriate
diameter for your engine to optimize aerobatic
performance on this model
❏
Top Flite Super MonoKote ® covering (approx. 3 rolls)
– See Covering (page 39)
❏
Fuelproof paint, See Painting (page 39)
❏
Fuel tank 10 oz. (GPMQ4104)
❏
3' Medium fuel tubing (GPMQ4131)
❏
Nylon reinforced packing tape
❏
1/4" Latex foam rubber padding (HCAQ1000)
❏
(2) 2-1/2" Wheels (GPMQ4223)
❏
(1) 3/4" Tailwheel (GPMQ4240)
❏
(1) 3/16" Wheel collar (GPMQ4308)
❏
3" Spinner (GPMQ4530, White)
❏
Pilot (DGA 1/4 scale sportsman pilot used in protype,
DGAQ2010)
❏
Fueling system [Great Planes Easy Fueler ™ , (GPMQ4160)
or Aluminum Fuel Line Plug, (GPMQ4166)]
❏
12" Velcro ™ non-adhesive backed hook and loop material
These are the building tools, glue, etc., that we recommend
and mention in the manual.
We recommend Great Planes Pro ™ CA and Epoxy.
❏
2 oz. Pro CA (Thin, GPMR6003)
❏
2 oz. Pro CA+ (Medium, GPMR6009)
❏
1 oz. Pro CA- (Thick, GPMR6014)
❏
2 oz. Pro CA accelerator (GPMR6035)
❏
6-Minute Pro Epoxy (GPMR6045)
❏
30-Minute Pro Epoxy (GPMR6047)
❏
Pacer Formula 560 canopy glue (PAAR3300)
❏
Hobby knife [handle (HCAR0105), #11 Blades
(HCAR0311), 100 Qty.]
❏
X-ACTO ® Razor Saw (XACR2531)
❏
Pliers (Common and Needle Nose)
❏
Screwdrivers (phillips and flat blade)
❏
Small T-pins (HCAR5100)
❏
Medium T-pins (HCAR5150)
❏
Masking tape (TOPR8018)
❏
Plan Protector (GPMR6167)
❏
Groove Tube ™ (GPMR8140)
❏
HobbyLite ™ balsa colored filler (HCAR3401)
❏
Bondo ® or Squadron white putty
❏
Monofilament line for aligning wing & stabilizer
❏
Builder’s triangle set (HCAR0480)
❏
1/4-20 Tap (GPMR8105, drill bit included)
❏
Soldering iron and solder
❏
Sealing iron (TOPR2100)
❏
CG Machine ™ (GPMR2400)
❏
Dead Center ™ engine mount hole locator (GPMP8130)
❏
AccuThrow ™ deflection meter (GPMR2405)
❏
Hand or electric power drill
❏
Drill bits: 1/16", 5/64", 3/32", 7/64", 1/8", 5/32", #18 or
11/64", 3/16", #10 or 13/64", 7/32", 1/4", 17/64"
❏
Bar sander or sanding block and sandpaper (coarse,
medium, fine grit)
Made of durable, lightweight aluminum, Easy-Touch
Sanders have a uniquely contoured handle that lets you
work longer with less fatigue! The incredibly flat sanding
surface removes high spots with ease. The 5.5" Hand
Sander is ideal for small parts and tight spaces. Use the
11" - 44" Bar Sanders for larger areas. Take the guesswork
out of sanding curved or angled shapes with the
Easy-Touch Multi-Sander. Available in 11" and 22" lengths.
Easy-Touch adhesive-backed sandpaper is already
trimmed to these tools’ width...just cut it to length and
press in place. Available in 4 different grits.
GPMR6169 Easy-Touch Hand Sander-5.5"
GPMR6170 Easy-Touch Bar Sander-11"
GPMR6172 Easy-Touch Bar Sander-22"
GPMR6174 Easy-Touch Bar Sander-33"
GPMR6176 Easy-Touch Bar Sander-44"
GPMR6190 Easy Touch Multi-Sander-11"
GPMR6191 Easy Touch Multi-Sander-22"
GPMR6180 Easy-Touch 80-Grit Sandpaper-12' roll
GPMR6183 Easy-Touch 150-Grit Sandpaper-12' roll
GPMR6184 Easy-Touch 180-Grit Sandpaper-12' roll
GPMR6185 Easy-Touch 220-Grit Sandpaper-12' roll
❏
CA Applicator tips (HCAR3780)
❏
Epoxy brushes (GPMR8060)
❏
Epoxy mixing sticks (GPMR8055, Qty. 50)
❏
CA Debonder (GPMR6039)
Optional Tools or Accessories
Building Supplies and Tools
4