GTCO ADB Features: Station & UltraSlate Products - Manual

ADB Features Station and UltraSlate Products
ADB unit powers up as a mouse and the driver switches to tablet mode when “talk r2” is
received (units released before 7/1/98 switch on” talk r1”). Inc run at 1000 lpi with
extended data enabled.
ADB Formats
The unit powers up as both a mouse and tablet. Only one of the two devices is active at
any one time. The mouse is the default. To change over to the tablet, you must issue a
(talk reg 1 pre July 98 firmware) and reg 2 (July 98 firmware) to address four or the current
tablet address.
ADDRESS 3 REG 0 MOUSE FORMAT
ADDRESS 4 REG 0 TABLET FORMAT