GTCO Summagrid IV - Users Guide Part 1 - Manual

Summagrid IV 1
Part 1 Summagrid IV User Information
Part 1 explains how to install and run Summagrid IV. It covers all of the basics including,
preparation for installation, set up, configuring the tablet and digitizing.
First Time Users
Read this section first before attempting to install and use the tablet. Take the necessary
time to familiarize with Summagrid IV and how it works.
Advanced Users
Go to Part 2: Summagrid IV Programming Reference. This part of the manual provides
information on Summagrid IV commands, output formats and writing software drivers.
Following chapters in Part 1:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5 Pre-Installation Considerations
Installing Summagrid IV Tablet
Digitizing with Summagrid IV
Summagraphics LT Drivers and Utilities
Maintenance and Troubleshooting