GTCO Summagrid IV - Users Guide Part 1 - Manual (Page 4)

Summagrid IV 4
Chapter 2 Installing Summagrid IV Tablet
The following chapter offers basic instructions for setting up Summagrid IV and running the
tablet in the default configuration. If the user wishes to change any of the DIP switch
settings or other default parameters, refer to the appropriate sections, which are noted
throughout the chapter.
2.1
2.1.1
2.1.2
2.2
2.2.1 Pre-Installation Overview
Equipment Overview
Controller Overview
Installing Summagrid IV
Preparing Summagrid IV for Use 5
5
5
6
6