Heli-Max HMXE0804 - Manual (Page 12)

12
Installing the Flight Battery
o Slide the flight battery into the Novus CP Helicopter as shown.
PREFLIGHT PREFLIGHT
Turning the Model On
o The Novus CP Helicopter uses a 2.4GHz system that requires a binding
process when the unit is powered up. This process involves connecting the
flight battery to the ESC with the transmitter turned off. Ensure that the throttle
stick is at its
lowest position, and the idle up switch is off. Then turn the
transmitter on. You will notice that the transmitter indicator begins to flash,
indicating that the binding process is taking place.
Once the indicator quits flashing you should see the servos move, signifying
that the receiver is now bound to the transmitter. The helicopter must be left
still for 5 seconds so the gyro can perform the initialization process. The Novus