Heli-Max HMXE0804 - Manual (Page 22)

22
NOVUS CP – REPLACING A MOTOR
Unplug the motor from
the E-Board and remove
the
motor mounting
screws. Remove the old
motor and install the new
motor. Reinstall the motor
mounting screws and plug
the motor connector back
into the E-Board.
NOVUS CP – E-BOARD CONNECTIONS
Function Default Switch
Elevator Reversing Switch Off 1
Aileron Reversing Switch Off 2
Throttle Reversing Switch Off 3
Rudder Reversing Switch On 4
Pitch Reversing Switch On 6
Revolution Mixing Reversing Switch On 8
CCPM Mixing / Normal Mixing On 9
Pitch Curve Adjustment Off 11
Gear Reversing Switch Off 5
Gyro Gain and Revolution Mixing Off 12
Throttle Position and Servo Exponential Adjustment Off 10
CCPM Elevator Reversing Switch Off 7
Transmitter Settings
WARNING!!
The Heli-Max Novus CP has
been factory-set and test
flown. Do not make adjust-
ments to the transmitter
settings until you have flown
the model a few times.