Heli-Max HMXE0804 - Manual (Page 19)

19
MAINTENANCE & REPAIR MAINTENANCE & REPAIR
Working on the Heli-Max ™ Novus CP will require small tools. The DTXR0170
DuraTrax ® Precision Phillips Screwdriver 00x75mm is recommended for the
Novus CP.
Although the Novus CP is a sturdy helicopter, on occasion it will be necessary
to replace damaged parts after a crash. Please use this section as a guide to
performing these steps.
NOVUS CP – MAIN ROTOR BLADE REPLACEMENT
Remove the blade bolt
using a #00 phillips
screwdriver. After the blade
bolt has been removed,
slide the rotor blade out
of the blade grip. Reinstall
the new blade, ensuring
that the holes within the
blade and blade grip are
aligned properly. Reinstall
the blade bolt.
NOVUS CP – MAIN ROTOR GRIP REPLACEMENT
Remove both blade bolts
and main rotor blades.
Remove the linkages from
both blade grip mixers.
Remove the two spindle
screws and the blade grips
can be easily removed.
Reinstall the parts in the
reverse order listed above.