HONDA 2006 S2000 - Owner's Manual - Manual (Page 101)

Cause
Error
Message
Handle a CD by its edges; never
touch either surface. Do not place
stabilizer rings or labels on the CD.
These, along with contamination
from fingerprints, liquids, and felt-tip
pens, can cause the CD to not play
properly or possibly jam in the drive.
If you see an error message in the display while playing a CD, find the cause
in the chart below. If you cannot clear the error message, take the vehicle to
your dealer.
Solution
FOCUS Error
Mechanical Error
High temperature
Press the EJECT button, and pull out the CD.
Check if the CD is inserted correctly in the CD
player.
Make sure the CD is not scratched or damaged.
Press the EJECT button, and pull out the CD.
Check the CD for damage or deformation.
If the CD cannot be pulled out or the error
message does not disappear after the CD is
ejected, see your dealer.
Do not try to force the disc out of the player.
Will disappear when the temperature returns to
normal.
Protecting Your CDs, CD Player Error Messages
CD Player Error Messages
Fe
a
tu
re
s
99
Main Menu Table of Contents