Vents, heating, and a/c – HONDA 2006 S2000 - Owner's Manual User Manual

Page 87

Advertising
background image

For your safety, make sure you have
a clear view through all the windows
before driving.

To clear the windows faster, you can
close the dashboard corner vents
and the vents on both sides of the
instrument panel by rotating the
wheel below the vent. This will send
more warm air to the windshield

defroster vents. Once the windshield
is clear, select fresh air mode to
avoid fogging the windows.

Push the fan control level down until
the indicator goes off. A lack of
airflow can cause the windows to fog
up. You should keep the fan on at all
times so stale air and moisture do
not build up in the interior and cause
fogging.

Select

. The system

automatically switches to fresh air
mode and turns on the A/C.
Select

.

Set the fan and temperature
controls to the maximum level.

When you switch to another mode
from

, the A/C stays on.

Press the A/C button to turn it off.

Set the fan to the desired speed.
Select high for faster defrosting.
Select

. The system

automatically switches to fresh air
mode and turns on the A/C.
Adjust the temperature so the

airflow feels warm.
Select

to help clear the

rear window.
To increase airflow to the
windshield, close the corner vents.

To remove fog from the inside of the
windows:

Air conditioning, as it cools, removes
moisture from the air. When used in
combination with the heater, it
makes the interior warm and dry.

Turn the fan on.
Turn on the air conditioning.
Select

and fresh air mode.

Adjust the temperature to your
preference.

This setting is suitable for all driving
conditions whenever the outside
temperature is above 32°F (0°C).

1.

2.
3.

4.

5.

1.

2.

3.

1.
2.
3.
4.

Vents, Heating, and A/C

To Turn Everything Of f

To Remove Exterior Frost or Ice
From the Windows

To Def og and Def rost

To Dehumidif y the Interior

Fe
a

tu

re

s

85

Main Menu

Table of Contents

Advertising