Fuses – HONDA 2006 S2000 - Owner's Manual User Manual
Page 189
CONTINUED
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
If something electrical in your
vehicle stops working, check for a
blown fuse first. Determine from the
chart on pages
and
, or the
diagram on the fuse box lid, which
fuse or fuses control that device.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.
Check the smaller fuses in the
under-hood fuse boxes and all the
fuses in the interior fuse box by
pulling out each one with the fuse
puller provided in the primary
under-hood fuse box.
Check each of the large fuses in
the primary under-hood fuse box
by looking through the top at the
wire inside. Removing these fuses
requires a Phillips-head
screwdriver.
Remove the cover from the fuse
box.
1.
2.
3.
4.
Fuses
Checking and Replacing Fuses
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
187
BLOWN
Main Menu
Table of Contents