HONDA 2006 S2000 - Owner's Manual - Manual (Page 138)

Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100 %’’ on the odometer/
trip meter display the next time you
turn the ignition switch to the ON
(II) position.
When the vehicle needs
maintenance, maintenance codes
appear on the information display.
For an explanation of the
maintenance codes, see page
.
Turn the ignition switch to the ON
(II) position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
Press the TRIP button until the
engine oil life indicator is
displayed.
Press the TRIP button for more
than 10 seconds. The engine oil
life indicator and the maintenance
item code(s) will blink. 3.
1.
2.
139
Resetting the Engine Oil Lif e
Indicator Maintenance Main Items and Sub
Items
Maintenance Minder
136
ENGINE OIL LIFE
INDICATOR
MAINTENANCE ITEM CODE
Main Menu Table of Contents