HONDA 2005 Accord Hybrid - Owner's Manual - Manual (Page 147)

Press and hold the remote control
button and one of the HomeLink
buttons at the same time.
If you just
received your vehicle and have not
trained any of the buttons in
HomeLink before, you should erase
any previously learned codes before
training the first button. To do this,
press and hold the two outside
buttons on the HomeLink
Transceiver for about 20 seconds, or
until the red indicator flashes.
Release the buttons, then go to step
1.
If you are training the second or
third buttons, go directly to step 1.
Unplug the garage door opener
motor from the house current.
Hold the end of the garage door
opener remote control 2 to 5
inches from HomeLink. Make
sure you are not blocking your
view of the red indicator in
HomeLink. 2.
3.
1.
Training HomeLink
Bef ore you begin
HomeLink Universal Transceiver
146
Main Menu Table of Contents