HONDA 2005 Accord Hybrid - Owner's Manual - Manual (Page 75)

When you turn the ignition switch to
the ON (II) position and release the
parking brake, the high beam
headlights and the high beam
indicator come on at reduced
brightness if the headlight switch is
off.
The daytime running lights are off
when the headlight switch is in the
or position.
The Select/Reset knob on the
instrument panel controls the
brightness of the instrument panel
lights. Turn the knob to adjust the
brightness.
The instrument panel will illuminate
with reduced brightness when you
unlock and open the driver’s door.
The brightness will increase slightly
when you insert the key in the
ignition switch, then go to normal
brightness when you turn the
ignition switch to ON (II).
If you do not insert the key in the
ignition switch after opening the
driver’s door, the illumination turns
off in about 30 seconds.
If you insert the key but do not turn
the ignition switch to ON (II), the
illumination turns off in about 10
seconds.
Instrument Panel Brightness Daytime Running Lights
(Canadian Model)
Daytime Running Lights, Instrument Panel Brightness
74
SELECT/RESET KNOB
Main Menu Table of Contents