Installing a child seat – HONDA 2005 Accord Hybrid - Owner's Manual User Manual
Page 45
A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
After properly securing the child
seat (see page
), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
Tighten the strap according to the
seat maker’s instructions.
After properly securing the child
seat (see page
), route the
tether strap over the seat-back.
Follow steps 2 and 3 from the
previous column.
Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
1.
2.
3.
1.
2.
Installing a Child Seat with a
Tether
Using an Outer Anchor
Using the Center Anchor
Installing a Child Seat
44
TETHER STRAP HOOK
TETHER ANCHORAGE POINTS
TETHER STRAP HOOK
ANCHOR
ANCHOR
Main Menu
Table of Contents