HONDA 2005 Accord Hybrid - Owner's Manual - Manual (Page 214)

To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.
Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
Install the new bulb and turn it
clockwise to lock it in place.
Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
Test the new bulb to make sure it
works.
Put the inner fender cover in place.
Install and lock each holding clip
by pushing on the center.
Pull the inner fender cover away
from the fender and bumper.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise. 1.
3.
2.
4.
8.
7.
6.
9.
5. Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb
Lights
Ma
int
e
na
nce
213
HOLDING CLIPS
BULB
Main Menu Table of Contents