Changing a flat tire (canadian model) – HONDA 2005 Accord Hybrid - Owner's Manual User Manual
Page 238
If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area that is
far away from the traffic lanes.
Loosen the wheel nuts 1/2 of a
turn with the wheel wrench.
Unscrew the wing bolt and take
the spare tire out of its well.
Take the tool tray out of the trunk,
and take the tools out of the tool
tray.
Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
Turn on the hazard warning lights,
and turn the ignition switch to
LOCK (0). Keep your passengers
out of the vehicle while changing a
tire.
Open the trunk and raise the trunk
floor by lifting up on the back edge.
5.
4.
3.
2.
1.
6.
Changing a Flat Tire (Canadian Model)
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
237
TOOL TRAY
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
Main Menu
Table of Contents