HONDA 2005 Odyssey - Owner's Manual - Manual (Page 124)

When the light switch is in the
‘‘
’’ or ‘‘ ’’ position, the
lights on indicator comes on as a
reminder. This indicator stays on if
you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or LOCK (0)
position.
To switch from low
beams to high beams, push the left
lever forward until you hear a click.
The blue high beam indicator will
come on (see page
). Pull it back
to return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams will stay on as long as you
hold the lever back.
Turn the fog lights on and off by
turning the switch next to the
headlight switch.
To turn on the automatic lighting,
turn the light switch to AUTO at any
time. The lights will come on
automatically when the outside light
level becomes low (at dusk, for
example). The lights on indicator
comes on as a reminder. The lights
and indicator turn off automatically
when the system senses high
ambient light.
The automatic lighting
feature turns on the headlights, all
other exterior lights, and the
instrument panel lights when it
senses low ambient light.
You can use the fog lights only when
the headlights are on low beam. The lights turn off automatically
when you turn the ignition switch to
LOCK (0). To turn them on again,
either turn the ignition switch to ON
(II), or turn the light switch to
.
Even with the automatic lighting
feature turned on, we recommend
that you turn on the lights manually
when driving at night or in a dense
fog, or when you enter dark areas
such as long tunnels or parking
structures.
Do not leave the light switch in
AUTO if you will not be driving the
vehicle for an extended period (a
week or more). You should also turn
off the lights if you plan to leave the
engine idling or the engine off for a
long time.
69
CONTINUED
On Touring model
Touring model only
High Beams
Fog Lights
AUTO
Headlights
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
123
Main Menu Table of Contents