HONDA 2005 Odyssey - Owner's Manual - Manual (Page 90)

You can also use the trip meter
SELECT/RESET knob in the
instrument panel to select and enter
your selections while the multi-
information display is in the
customizing mode. Turn the knob to
select a setting and press it to enter
your selection.
Use the INFO button on the steering
wheel to see the settings, and the
SEL/RESET button to enter your
selections. If you want the settings as they were
when the vehicle left the factory,
select ‘‘DEFAULT ALL,’’ as
described on page
.
If you want to change any vehicle
control settings, select ‘‘CHANGE
SETTING,’’ and follow the
instructions on page
.
Every time you press the INFO
button, the display cycles from
‘‘CHANGE SETTING,’’ ‘‘DEFAULT
ALL,’’ ‘‘EXIT,’’ and then back to
‘‘CHANGE SETTING’’ as shown in
the next column.
You can customize some vehicle
control settings for ‘‘DRIVER 1’’ and
‘‘DRIVER 2’’ separately. If ‘‘DRIVER
1’’ or ‘‘DRIVER 2’’ is not displayed,
customizing is not possible.
DEFAULT ALL
CHANGE SETTING
The first customizing menu is:
To enter the customizing mode, the
vehicle must be stopped and the
transmission must be in Park. Press
and hold the INFO button on the
steering wheel for about 3 seconds
while the multi-information display is
in its normal message mode.
90
92
Customized Settings
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
89
Main Menu Table of Contents