Wiper blades – HONDA 2005 Odyssey - Owner's Manual User Manual
Page 346
Advertising
Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Slide the new wiper blade into the
holder until the tabs lock.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Front windshield: Lower the
passenger’s side first, then the
driver’s side.
Lower the wiper arm against the
windshield.
6.
7.
4.
5.
3.
Wiper Blades
Ma
int
e
na
nce
345
BLADE
BLADE
REINFORCEMENT
Main Menu
Table of Contents
Advertising