HONDA 2003 Pilot - Owner's Manual - Manual (Page 135)

You can manually select various
functions of the Climate Control
system when it is in FULL AUTO.
All other features remain auto-
matically controlled. Making any
manual selection causes the word
FULL to go out.
Press the A/C button to turn the air
conditioning on and off. You will see
A/C ON or A/C OFF in the display.
When you turn the A/C off, the sys-
tem cannot regulate the inside tem-
perature if you set the dial below the
outside temperature. With the A/C
on, use the temperature control dial
to adjust the temperature of the air
flow to a comfortable setting.
This button controls the source of
the air going into the system. When
the indicator above this button is lit,
air from the vehicle’s interior is sent
through the system again (Recircula-
tion mode). When the indicator is off,
air is brought in from outside the
vehicle (Fresh Air mode).
You can, for example, manually put
the system in recirculation mode
when driving through an area of
smoke or fumes.
You can manually select the fan
speed by pressing the fan control
buttons. When you press either
button, the fan is taken out of
automatic mode and starts to run at
its lowest speed. Pressing the
button repeatedly makes the fan run
faster. The fan speed is shown by
vertical bars in the display.
CONTINUED
Comf ort and Convenience Features
Climate Control System
Semi-automatic Operation
Air Conditioning (A/C) Button
Recirculation Button Fan Control Buttons
131
Main Menu Table of Contents