Engine oil – HONDA 2003 Pilot - Owner's Manual User Manual

Page 290

Advertising
background image

Install a new oil filter according to
instructions that come with it.

Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:

Refill the engine with the recom-
mended oil.
Engine oil change capacity
(including filter):

Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.

Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator light should go out within
five seconds. If it does not, turn off
the engine and check your work.

Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.

Turn off the engine, let it sit for
several minutes, then check the oil
level. If necessary, add oil to bring
the level to the upper mark on the
dipstick.

9.

8.

7.

6.

4.

5.

3.

Engine Oil

Maintenance

286

OIL FILTER

29 lbf·ft (39 N·m , 4.0 kgf·m)

5.1 US qt (4.8

, 4.2 Imp qt)

Improper disposal of engine oil can be

harmful to the environment. If you

change your own oil, please dispose of

the used oil properly. Put it in a sealed

container and take it to a recycling

center. Do not discard it in a trash bin

or dump it on the ground.

Main Menu

Table of Contents

Advertising