Jump starting – HONDA 2003 Pilot - Owner's Manual User Manual

Page 348

Advertising
background image

Start your vehicle. If the starter
motor still operates slowly, check
the jumper cable connections to
make sure they have good metal-
to-metal contact.

Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then the booster battery.

Connect the second jumper cable
to the negative (

) terminal on

the booster battery. Connect the
other end to the grounding strap
as shown. Do not connect this
jumper cable to any other part of
the engine.

The numbers in the illustration show
you the order to connect the jumper
cables.

If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.

Connect one jumper cable to the
positive (

) terminal on your

Honda’s battery. Connect the
other end to the positive (

)

terminal on the booster battery.

5.

7.

3.

4.

6.

Taking Care of the Unexpected

Jump Starting

344

BOOSTER BATTERY

Main Menu

Table of Contents

Advertising