HONDA 2003 Pilot - Owner's Manual - Manual (Page 184)

With a cassette playing, you can use
the FF, REW, SKIP, or REPEAT
function to find a desired program.
The SKIP and REPEAT functions
use silent periods on the tape to find
the end of a song or passage. These
features may not work to your
satisfaction if there is almost no gap
between selections, a high noise
level between selections, or a silent
period in the middle of a selection.
Fast Forward and Re-
wind move the tape rapidly. To re-
wind the tape, push the REW button.
You will see REW in the display. To
fast forward the tape, push the FF
button. You will see FF displayed.
Press the FF, REW or PLAY/PROG
button to take the system out of re-
wind or fast forward. When the sys-
tem reaches the end of the tape, it
reverses direction and begins to play.
To stop the SKIP function before it
finds the beginning of a song or
passage, press either SKIP button
(
or ).
The Repeat function
continuously replays the current
song or passage. Press the RPT
button to activate it; you will see RPT
displayed as a reminder. When the
system reaches the end of the song
or passage currently playing, it will
automatically go into rewind. When
it senses the beginning of the same
song or passage, the system returns
to PLAY mode. It will continue to
repeat this same program until you
deactivate REPEAT by pressing the
button again.
Pressing the REW or FF button, or
either SKIP button, also turns off
REPEAT.
The SKIP function allows
you to find the beginning of a song
or passage. To skip to the beginning
of a song or passage currently
playing, push the
button. You will
see REW flashing in the display as
the tape rewinds. To skip to the
beginning of the next song, push the
button. You will see FF flashing in
the display as the tape fast forwards.
When the system finds the begin-
ning of a song or passage, it goes
back to PLAY. Tape Search Functions
FF/REW
REPEAT
SKIP
Audio System
Comf ort and Convenience Features 180
Main Menu Table of Contents