HONDA 2000 Accord Coupe - Owner's Manual - Manual (Page 221)

Cooling System
2. Turn the radiator cap counter-
clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.
3. Remove the radiator cap by
pushing down and turning
counterclockwise.
4. The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
5. Put the radiator cap back on.
Tighten it fully.
6. Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Maintenance
RADIATORCAP
4-cylinder models 6-Cylinder models RADIATORCAP 4-cylinder models RESERVETANK
Main Menu Table of Contents