HONDA 2000 Accord Coupe - Owner's Manual - Manual (Page 248)

Drive Belts, Timing Belt
The belts should have the following
"play" or deflection.
4-cylinder models
Alternator belt:
0.28 — 0.35 in (7.0 —9.0 mm)
Power steering belt:
0.51 — 0.63 in (13.0 —16.0 mm)
6-cylinder models
Power steering belt:
0.51 — 0.65 in (13.0 — 16.5 mm)
If you see signs of wear or looseness,
have your dealer adjust or replace
the belts.
Timing Belt
The timing belt and balancer belt (4-
cylinder models only) should
normally be replaced at the intervals
shown in the maintenance schedule.
Replace these belts at 60,000 miles
(U.S.) or 100,000 km (Canada) if you
regularly drive your car in one or
more of these conditions:
In very high temperatures
(over 110°F,43°C).
In very low temperatures
(under — 20°F, — 29°C).
Maintenance
Main Menu Table of Contents