HONDA 2000 Accord Coupe - Owner's Manual - Manual (Page 236)

Hood Latch, Spark Plugs (4-cylinder Models)
Clean the hood latch assembly with a
mild cleaner, then lubricate it with a
multipurpose grease. Lubricate all
the moving parts, including the pivot.
To lubricate them, remove the
holding clip and pull the cover away.
Follow the time and distance
recommendations in the
Maintenance Schedule. If you are
not sure how to clean and grease the
latch, contact your Honda dealer.
Spark Plugs
The spark plugs in your car should
be replaced according to the time
and distance recommendations in
the maintenance schedule.
Replacement
SPARK PLUG CAP
1. Clean up any dirt and oil around
the spark plug caps.
2. Remove the spark plug cap by
pulling it straight out.
3. Remove the spark plug with
a five-eighths inch (16 mm) spark
plug socket.
CONTINUED
Maintenance
Hood Latch
LATCH ASSEMBLY
PIVOTS
Main Menu Table of Contents