HONDA 2000 Accord Coupe - Owner's Manual - Manual (Page 266)

Lights
Replacing a Rear License Bulb
1. Use a Phillips-head screwdriver to
loosen the two screws holding the
license plate light assembly to the
bracket. Slide the assembly out
from the bracket.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
4. Turn on the parking lights and
check that the new bulb is
working.
5. Put the license light assembly in
place. Tighten the two screws
securely.
Maintenance
Main Menu Table of Contents