Changing a flat tire – HONDA 2000 Accord Coupe - Owner's Manual User Manual
Page 281
Advertising
![background image](/manuals/678950/281/background.png)
Changing a Flat Tire
7. Turn the jack's end bracket
counterclockwise to loosen it, then
remove the jack.
8. Loosen the four wheel nuts (4-
cylinder) or five (V-6) 1/2 turn
with the wheel wrench.
9. Find the jacking point nearest the
wheel you are removing. Place the
jack under the jacking point. Turn
the end bracket clockwise until
the top of the jack contacts the
jacking point. Make sure the
jacking point tab is resting in the
jack notch.
Taking Care of the Unexpected
JACK
WHEEL NUTS
WHEEL WRENCH
JACKING POINT
Main Menu
Table of Contents
Advertising