HONDA 2000 Odyssey - Owner's Manual - Manual (Page 194)

Service Station Procedures
If you can open the hood without
lifting the hood latch handle, or the
hood latch handle moves stiffly or
does not spring back as before, the
mechanism should be cleaned and
lubricated (see page
254 ).
SUPPORT ROD
3. Pull the support rod out of its clip
and insert the end into the hole on
the driver's side of the hood.
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop.
After closing the hood, make sure it
is securely latched.
CONTINUED
Before Driving
Main Menu Table of Contents