Gauges – HONDA 2000 Odyssey - Owner's Manual User Manual

Page 66

Advertising
background image

Gauges

Trip Meter
This meter shows the number of

miles (U.S.) or kilometers (Canada)

driven since you last reset it.

There are two trip meters: Trip A

and Trip B. Switch between these
displays by pressing the Select/
Reset button repeatedly. Each trip

meter works independently, so you

can keep track of two different
distances.

To reset a trip meter, display it and

then press and hold the Select/Reset
button until the number resets to

"0.0".

Temperature Gauge

This shows the temperature of the

engine's coolant. During normal
operation, the pointer should rise

from the bottom white mark to about

the middle of the gauge. In severe

driving conditions, such as very hot

weather or a long period of uphill

driving, the pointer may rise to near

the upper white mark. If it reaches
the red (Hot) mark, pull safely to the

side of the road. Turn to page

305

for

instructions and precautions on

checking the engine's cooling
system.

Fuel Gauge

This shows how much fuel you have.

It is most accurate when the vehicle
is on level ground. It may show

slightly more or less than the actual
amount when you are driving on
curvy or hilly roads.

The needle returns to the bottom

after you turn off the ignition. The
gauge shows the fuel level reading
immediately after you turn the
ignition switch back ON (II).

Instruments and Controls

Main Menu

Table of Contents

Advertising