HONDA 2000 Odyssey - Owner's Manual - Manual (Page 256)

Air Cleaner Element
3. Disconnect the clip from the bolt
on the air cleaner housing, then
remove the air cleaner housing
cover.
4. Remove the old air cleaner
element.
5. Carefully clean the inside of the
air cleaner housing with a damp
rag.
The coolant lines inside the air
cleaner housing may be warm.
Do not open the hot air valve when
cleaning the inside of the air cleaner
housing.
6. Place the new air cleaner element
in the air cleaner housing.
7. Reinstall the air cleaner housing
cover. Reinstall the clip on the
bolt; make sure the clip is under
the washer. Tighten the four bolts.
8. Reinstall the air intake cover.
Reinstall the two pins and secure
them by pushing on the heads
until they lock.
Maintenance
CLIP
HOT AIR
VALVE AIR CLEANER ELEMENT
Main Menu Table of Contents