Changing a flat tire – HONDA 2000 Odyssey - Owner's Manual User Manual
Page 301
Advertising
Changing a Flat Tire
18. Lower the vehicle to the ground
and remove the jack.
19. Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf.ft (108 N.m , 11 kgf.m)
20. Put the flat tire in the supplied
vinyl bag. This bag is stored in the
rear compartment on the driver's
side panel in the third row. Knot
the top of the vinyl bag.
Taking Care of the Unexpected
Main Menu
Table of Contents
Advertising