HONDA 2000 Odyssey - Owner's Manual - Manual (Page 279)

Lights
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
6. Test the lights to make sure the
new bulb is working.
7. Reinstall the taillight cover.
Replacing a High-mount Brake
Light Bulb
1. Place a cloth on the middle edge
of a part of the lens on the
passenger's side. Remove a part of
the lens by carefully prying on its
edge with a small flat-tipped
screwdriver.
2. Use a Phillips-head screwdriver to
remove the screw under the lens.
3. Pull the light assembly out of the
tailgate.
4. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
5. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Maintenance
SCREW
Main Menu Table of Contents