Lights – HONDA 2000 CR-V - Owner's Manual User Manual
Page 234
Lights
Headlight Aiming
The headlights were properly aimed
when your vehicle was new. You
should check their aim if you
regularly carry heavy items in the
trunk. Each headlight assembly has
horizontal and vertical adjustment
indicators. These are set to their "0"
positions after the headlights are
aimed at the factory.
To check these settings:
1. Make sure the fuel tank is full.
Park the vehicle on level ground.
2. The driver or someone who
weighs the same should be sitting
in the driver's seat for all checks
and adjustments.
Load your vehicle with the items
you normally cany.
HORIZONTAL ANGLE GAUGE
3. Open the hood.
4. Pull the inner fender off (see page
).
5. Check the horizontal angle gauge.
The line on the adjustment screw
indicator should line up with the
"0" mark on the gauge.
Maintenance
Main Menu
Table of Contents