HONDA 2000 CR-V - Owner's Manual - Manual (Page 45)

Protecting Children
Driver and Passenger Safety
Install the anchor plate and
mounting hardware. The hardware is
available for purchase from your
Honda dealer (part number 82410-
SE3-C01). For Canadian models, the
hardware is supplied with the vehicle.
All Models
When installing tether hardware,
make sure the toothed washer is on
the bottom of the bolt. Tighten the
bolt to:
16lbf.ft(22N.m,2.2kgf.m)
If a torque wrench was not used, see
your Honda dealer as soon as
possible to verify proper installation.
Attach the tether strap hook to the
tether anchorage point and tighten
the strap according to the child seat
maker's instructions.
If you are not sure how to install the
tether, or you need mounting
hardware, contact your Honda dealer.
Main Menu Table of Contents