HONDA 2000 CR-V - Owner's Manual - Manual (Page 238)

Lights
3. Pull the inner fender cover back.
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
5. To remove the turn signal/side
marker bulb, push it in slightly and
turn it counterclockwise. To
remove the parking light bulb, pull
it straight out of its socket.
6. Install the new bulb in the socket.
7. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
8. Test the lights to make sure the
new bulb is working.
9. Put the inner fender cover in place.
Install the fastener and push on
the center until it locks (the center
is flush with the head).
Replacing Rear Bulbs
1. Open the tailgate. Remove the
three screws and remove the rear
light assembly from the rear pillar.
2. Determine which of the three
bulbs is burned out: stop/taillight,
turn signal light or back-up light.
Maintenance
Main Menu Table of Contents