HONDA 2000 CR-V - Owner's Manual - Manual (Page 260)

Changing a Flat Tire
TOP SLIT
23.Hold the cover at the 10 o'clock
and 2 o'clock positions, then place
the top of it over the spare tire,
making sure the top slit on the
back of the cover is vertical.
Make sure the cover is at room
temperature before you install it. If it's
too cold, it won't fit easily over the tire.
24.Step back to check the alignment
of the logo. If needed, move the
cover left or right until the logo is
straight.
OUTSIDE SEAM
25.Starting at the top of the tire,
position the outside seam of the
cover slightly over the outside
edge of the tire. Pull the cover on,
a little at a time, and alternate side
to side along the tire until you
reach the bottom.
Taking Care of the Unexpected
NOTICE
Main Menu Table of Contents