IC Realtime Specialty: Interrogator DVR - a DVR for law enforcement - Manual (Page 108)

108
Figure 7-47
z Pan/Tilt/Zoom
Pan/Tilt/Zoom interface is shown as in Figure 7-48.
Please note you have properly set dome address and all connections are right.
—
Channel: Select the dome connected channel.
— Protocol: select the corresponding dome protocol.(such as Pelco)
— Address: Set corresponding dome address. Default value is 1. Please note your
setup here shall comply with your dome address; otherwise you can not control the
speed dome.
— Baud rate: Select the dome baud rate. Default setup is 9600.
— Data bit: Default setup is 8.
— Stop bit: Default setup is 1.
— Parity: Default setup is none.
— Matrix ID: Default value is 0. The value ranges from 0 to 255.
Figure 7-48