IC Realtime 1.3 Megapixel 18X PTZ Network Camera (ICIPMP1801S) - Manual (Page 7)

7
1 Features and Functions
1.1 General Introduction
The six-inch megapixel high speed smart network dome camera integrates the functions of network-based
remote surveillance and integrated high-speed smart dome, which makes it convenient to install and easy to
use. This product enjoys a megapixel resolution, which meets the customers' needs for surveillance at HD
level. This product is also qualified with intelligent identification ability, privacy masking settings, alarm
activation, WDR and some other functions. In addition, one can transmit audio/video and control data via
internet in a safe way. Thus, the surveillance is free from the restriction caused by the changes of time and
places to realize a real-time surveillance. With the built-in high-speed PTZ, this product can realize a fast,
accurate fixed-positioning surveillance in a convenient way.
1.2 Features
This series speed dome has the following features:
1.2.1 On-Screen Menu
This series product menu supports multiple languages.
It is easy for you to view dome information and configure dome, camera parameters.
1.2.2 Support multiple protocols
You can use various devices (such as matrix, control keyboard and DVR) and protocols to operate speed
dome.
1.2.3 Proportional Pan and Tilt
This function keeps the image from moving too fast when there is a large amount of zoom.
The quick-installed high definition speed dome continually decreases or increases pan and tilt speeds in
proportion to depth of zoom. When zooms speed is increasing, the camera moving speed becomes slow.
When zooms speed is decreasing, the camera moving speed becomes fast.
1.2.4 On-screen Tips
Here you can view:
z Dome title and system version (Software and hardware)
z Dome system temperature. (Optional. You can disable this function)
z Dome pan/tilt coordinates, preset ID.
1.2.5 Preset Setup and Call
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position. This series quick-installed high
definition speed dome supports 255 presets.
1.2.6 Auto Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan
speed. You can set 5 scanning paths.
1.2.7 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these addresses. You can set 8 touring paths. Each touring path
can contain max 32 presets.
1.2.8 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. Focus and iris are in auto mode during auto
pattern. For each pattern, the time should be less than 60 seconds.
1.2.9 Privacy Masking