Intellijel Korgasmatron II - Manual (Page 10)

Normalled inputs
08
FILTER A :
IN A : Signal input to filter A. Patch a audio signal here to
be filtered. The knob IN A attenuates this signal. This is
normalled to the IN B input of filter B.
FM2 A : CV input to VCF A filter cutoff, attenuated with
inversion by FM2 A knob. Normalled to VCF B FM2.
1V/Oct A : CV input for filter frequency calibrated for
1V/oct standard. This is normalled to the 1V/Oct CV input
of filter B.
FILTER B :
IN B : Signal input to filter B. Patch a audio signal here to
be filtered. The knob IN B attenuates this signal. This is
switching jack, inserting a plug here will break the
normal from IN A.
FM2 B : CV input to VCF B filter cutoff, attenuated with
inversion by FM2 B knob. This is a switching jack,
inserting a plug here will break the normal from FM2 A.
1V/Oct B : CV input for filter frequency calibrated for
1V/oct standard. This is switching jack, inserting a plug
here will break the normal from 1V/Oct A.
Advice : If you are using the Korgasmatron II in SERIAL
configuration inserting a plug into IN B jack will break the
internal routing from filter A which may cause confusion.
FM 2 CV
1V/Oct
quantized CV
signal to be
filtered