Intellijel Korgasmatron II - Manual (Page 6)

HP1 / 1-pole high-pass filter
04
Input attenuator IN A (and/or B) controls the level
into the filter A (and/or B).
For classic tone keep this below 12 oʼclock.
Higher gain will suppress the resonance of the
filter and change its tone.
The combination of IN A level, Q and Q Drive knobs
can alter the tone of the filter dramatically from
sweet to scathing - experiment!
set filter cutoff
frequency
filter A out filter B out
set resonance
self-oscillate
past 1 o'clock
unipolar
attenuator
for
FM1 input
set level of
resonance
bipolar
attenuator
for
FM2 input
gain unipolar
attenuator
for
signal A input
signal(s) to be filtered
increase
Q out
freq.
out
freq.
cutoff
cutoff