Intellijel Rubicon - Manual (Page 4)

Intellijel Rubicon Manual Version 1
Page | 4
D - Double Saw wave - A saw one octave above the VCO frequency
E - Zig Zag wave
F - Square wave
G - Pulse wave - Pulse type selected by the PULSE TYPE switch. Wave types: pulse (center
modulated), pulse (edge modulated), double frequency pulse
H - SUB - Sends a square wave either one or two octaves below the base frequency to the SUB output.
SUB OCT switch selects -1 octave or -2 octave below the VCO frequency.
This circuit is very similar to the SUB control on a classic Roland SH-101 synthesizer.