Intellijel Rubicon - Manual (Page 8)

Intellijel Rubicon Manual Version 1
Page | 8
Patch 2: Classic DCO style PWM Saw Strings
One of the special features of the Rubicon is the double frequency waveform outputs. These waves can
be used for FM modulation or combined with the other waves to give a richer sound. PWM saws can be
created by using the Double Saw and Pulse outputs into a cross fader creates a saw wave that can be
pulse modulated.
By setting the cross fader to the center so that both waves are equal the below waveform is generated.
20% PW 50% PW 80% PW
Changing the cross fader position will change the height of the pulse
20% cross fade, 50% PW 50% cross fade, 50% PW 75% cross fade, 50% PW
Support