Vertical Communications TeleVantage 7.5 - Manual (Page 125)

A PPENDIX A. V OICE AND C ONFERENCE R ESOURCE U SAGE IN T ELE V ANTAGE A-7
Conference maximums
The following table lists the maximum number of conferences or maximum number of
participants per conference.
Important: For all boards listed in the table, the maximum number of participants may be
reduced in the certain cases. If you are using the beep on call recording feature, the maximum
number of participants per conference is reduced by one while the call is being recorded. If you
are using Conference Manager 2.x, the maximum number of participants is reduced by one and
possibly two. For details, see “How conference resources are used” on page A-5.
Model number
Total conference
resources
Maximum conference support
MSI/80SC-GBL
31 Up to 7 parties per conference
MSI/160SC-GBL
MSI/240SC-GBL
MSI/80PCI-GBL
MSI/80PCI-GBL
DI/SI32 12 Up to 5 conferences
DISI16R2
16 Up to 5 conferences DISI24R2
DISI32R2
DM/V2400A 120 Up to 60 parties per conference
DM/IP241-1T1-P100
30 1
1. Conference resources are available on these boards only if you configure the board
with a media load that provides a host-based VoIP stack. See “Using a host-based
VoIP stack” on page 4-3 for more information.
Up to 30 parties per conference
DM/IP301-1E1-P100 Up to 20 parties per conference
DM/V480A-2T1-PCI
DM/V600A-2E1-PCI
DM/V1200A-4E1-PCI 60 Up to 60 parties per conference
DI0408LSAR2 2
2. The behavior of the DI0408LSAR2 integrated analog trunk and station board varies
depending on how it is configured. Conference resources are only available when
this board is configured with a media load (ML) 3 or 4. ML5 does not provide any con-
ference resources.
9 Up to 3 conferences
Strata CS-DKTU 32 Up to 4 parties per conference